Line following sensor issue

the line following sensor have input of 5v but the ports with 4 pins in Hexa Command Hub have output of only 3.3v , this is reason behind hexa command hub display get black on inserting power pin .

can anybody help me with this.?

@teamNRL PLS respond

Yeah, I also had this problem, and it is not because of the 3.3 V output of the hexa command hub. NRL tells you to put on the Arc8 sensor using the M3 metal screws which are present in the kit.

Because of the multi-layer PCB, the ground plane and the power rail are being shorted since the metal screw is conductive causing the short to be present on the 3.3v power rail, making the OLED not work because the OLED, along with the ESP32, works on 3.3 V.