HEXA Command Hub Not Working

Hey @TeamNRL , Our HEXA command hub was working like last week but now suddenly the motherboard screen is not switching on and few led lights on the motherboard that should shine is not shining. Also, if we connect everything together and start the robot, the robot does not connect to the controller and it gets kinda possessed, it started jumping and spinning and ramming and do random stuff. Is there any solution to this.

Raise a ticket on the NRL portal. They will help there.

2 Likes

this happened with our team also, you just need to upload the OS code again into the Hexa Command Hub

We tried, but when we connect the Hexa Command Hub to the laptop, it doesn’t connect and gives an error which tells the Motherboard has malfunctioned or something

We tried to upload the code but the port isn’t connecting

there are two ports, try both of them and keep the battery off while connecting hexa to the laptop/computer

we tried just now, it still doesn’t work, oled screen is dark even after flashing new code and necessary leds are off

It is not connecting to laptop, it tells some malfunction type error

We did, they haven’t responded yet

Try doing this

  1. Connect it via USB to the laptop
  2. hold boot
  3. while holding boot tap reset
  4. release boot
  5. hopefully it works

also if you can provide a video or photo i can try to help further