Hey, does anyone know how to read the analog inputs of the ARC 8-channel IR sensor array in the opmodes? Do we just have to use
power.readChannelVoltage(ADC_EXT_2) ?
Hey, does anyone know how to read the analog inputs of the ARC 8-channel IR sensor array in the opmodes? Do we just have to use
power.readChannelVoltage(ADC_EXT_2) ?
not sure probably power.readChannelVoltage(ADC_EXT_2) as you said
Yes, `power.readChannelVoltage(ADC_EXT_2)` may be the right approach, provided `ADC_EXT_2` is the ADC input connected to one of the ARC-8 sensor outputs on your specific controller.
The ARC-8 is an 8-channel analog IR sensor array, so each sensor produces an analog voltage that must be read from its corresponding ADC channel.
### Example for an FTC-style OpMode
If your controller exposes the sensor outputs through individual ADC channels, you could use a pattern like this:
```java
double voltage = power.readChannelVoltage(ADC_EXT_2);
telemetry.addData(“IR Sensor 1”, voltage);
telemetry.update();
```
Important: This reads only one ADC channel. To read all eight sensors, you need to map each sensor output to its corresponding ADC input and read each one separately. Don’t assume `ADC_EXT_2` reads all eight channels.
okay thanks a lot. any idea on how to read all the seperate 8 channels?
You’re welcome!
You can read all 8 channels by calling `readChannelVoltage()` separately for each ADC input, if your controller exposes eight individual ADC channels.
For example, the general pattern would be:
```java
double[] sensorValues = new double[8];
sensorValues[0] = power.readChannelVoltage(ADC_EXT_0);
sensorValues[1] = power.readChannelVoltage(ADC_EXT_1);
sensorValues[2] = power.readChannelVoltage(ADC_EXT_2);
// Continue for the remaining ADC channels
```
Then display the readings:
```java
for (int i = 0; i < 8; i++) {
telemetry.addData("IR Sensor " + i, sensorValues\[i\]);
}
telemetry.update();
```
can anyone help us to generate file for autonomous code in opmode?
yeah. when u make a new opmode the first thing it asks you in teh wizard is whether you want to make an autonomous code or teleop. choose autonomous in that
can anyone help us to connect ir sensor array to the hexa command hub?
i think its one of the analog 4 pin connectors. it is placed next to the motor driver cable
ONLY 5V, GND , sig pin connect with 5v, gnd and analog pin. no other pins (s2,s1,s0) connected
i dint understand this. pls ask this in the electronics tab as well